A gate valve, also known as a sluice valve, is a valve which opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired.Features: -
Size: - 25 NB TO 500 NB
Material: - CI, CS, IC, CF8, CF8M, GUN METAL (OTHER MATERIAL GRADE ON REQUEST)
End Connection: - Flanged end ANSI B 16.5, 150#, 300# and Screwed
Operation Type: - Hand wheel, gearbox or electric actuator
Pressure Rating: - 150# AND 300# AND OTHER CLASS AVAILABLE ON REQUEST
Related products
Air Vent Valve ( Air Release Valve )
( Customer review)
Air- Vent valves are used in independent, central, radiant panel heating systems & HVAC
systems, etc.OPERATION: - When there is air in the Air-Vent Valve, the force of the float weight acts on the
lever which is integral with the plug, thus causing it to move down. Air valves are hydro mechanical devices designed to automatically release air and wastewater gases or admit air during the filling, draining or operation of liquid piping systems
for water and wastewater services.
Brass check valve
( Customer review)
The main purpose of a check valve in a system is to prevent backflow, which could damage equipment or contaminate media upstream. Check valves are generally installed in pipelines to prevent backflow. A check valve is basically a
one-way valve, in which the flow can run freely one way, but if the flow turns the valve will close to
protect the piping, other valves, pumps etc.There are basically two type of check valve:
- Vertical check valve (Non return valve)
- Horizontal check valve (T type)
Hydraulic High Pressure Ball Valve
( Customer review)
Hydraulic ball valves are usually a kind of special stainless steel ball valves or carbon steel ball valves which are used in hydraulic industry, to control the fluid in the hydraulic systems.
Hydraulic ball valves are characterized by below features:
- Low fluid resistance, the full bore ball valve basically has no flow resistance.
- High pressure: the maximum working pressure can be up to 7500 psi (500 bar), depends on the sizes and connection type, because of this, hydraulic ball valves are also known as high pressure ball valves.
- Block body: different from the other types of ball valves such as 1 piece ball valves, 2 piece ball valves, three piece ball valves, fully weld ball valves and so on; the hydraulic ball valves body are in Square shape (Cuboids or cube). See in below picture.
- Leak-free and reliable. It has two sealing surfaces, and currently the ball valve sealing surface materials are mostly in a wide range of plastics, good sealing, can achieve a complete seal. It has also been widely used in vacuum systems.
- Hydraulic ball valves are with simple structure, small size, and light in weight.
- Easy to operate, fast to open and close, from full open to fully closed the rotation only is 90 degrees, so it is easy for remote controlling.
- Easy maintenance, ball valve structure is simple, the seal ring is generally active, and removal and replacement are more convenient.
- When fully open or fully closed, the sealing surfaces of the ball body and the valve seat are isolated from the medium. When the medium passes through, the sealing surface of the valve will not be eroded.
- Since the ball valve has wiping during opening and closing, it can be used in media with suspended solid particles.
- The end types of hydraulic ball valves to connect the hydraulic tubing usually are female BSP, NPT or UN/UNF thread, male ORFS connection or 24° cone connection.
