Quick Exhaust Valves facilitate accelerated movement of the cylinder rod or valve actuator. A Quick Exhaust Valve is a 3/2 valve with an extra large exhaust orifice designed to fit directly onto the cylinder port connection.The function of a quick-release valve is to rapidly exhaust air from the controlled device. It is normally located adjacent to the controlled device, rather than requiring exhaust air to return and exhaust through the control valve. This decreases release time.
FRL UNIT is basically combination of Air filter, Air regulator an Air lubricator.
Category: Pneumatics section
A drain valve performs the critical function of allowing excess water vapour to escape into the atmosphere. The removal of condensation helps prevent the formation of corrosion that will eventually damage the compressor and shorten its lifespan.Some compressed air auto drains work on the float principal. As water and contamination accumulates in the bottom of the bowl, it will ultimately lift a float. The compressed air, under pressure in the bowl, will then vent to atmosphere through the drain opening, blowing the water and debris from the bowl as it does.
Directional control valves are used in pneumatic systems to direct or stop the flow of compressed air or oil to their appliances. They are probably the most used elements in pneumatic systems and can be used for example to actuate a cylinder, a larger industrial valve, or air tools. The valves can have two or more ports and fulfil various circuit functions. The function and behaviour of the valve can be indicated by a symbol. The symbol however doesn't explain the construction of the valve. Directional control valves can be actuated by different means, such as manual actuation or solenoid actuation. This article focuses on the different directional solenoid valves for pneumatic systems.
The Push - In One Touch Fittings series pneumatic piping joints excelling in quick fitting, accurate jointing and compact design are suited to the pneumatic systems necessary for automation and labor saving. The tube can be fitted and detached easily, so that workability is remarkably improved. Pressure loss is reduced. A large volume of compressed air can be fed with least pressure loss without air leak. Moreover the joints have a compact design. Thus the joints will satisfy strict user's demands.