Diaphragm valves (or membrane valves) consists of a valve body with two or more ports, a diaphragm, and a “weir or saddle” or seat upon which the diaphragm closes the valve. The valve is constructed from either plastic or metal.
Aadarsh Hydropneumatics is a notable exporter and supplier of engineering products. Authorized and Specialist in F.R.L Combination
Filter, regulator, and lubricator (FRL) compressed air systems play a vital role in providing clean air at a specific pressure. Lubricator (if necessary) is required to confirm correct operation of pneumatic components and enhance their lifetime performance.
Each of the two ports on a two-way valve is alternately used to permit flow as well as close it off. A two-way valve can be specified to be either “normally open" or “normally closed” in its operation. With a normally open valve, the valve remains open until some type of current is applied to close the valve. Suspension of the electrical power causes the valve to automatically reopen to its normal state. A normally closed solenoid valve is the most common, working in the opposite fashion, remaining closed until a power source causes it to open
The Push - In One Touch Fittings series pneumatic piping joints excelling in quick fitting, accurate jointing and compact design are suited to the pneumatic systems necessary for automation and labor saving. The tube can be fitted and detached easily, so that workability is remarkably improved. Pressure loss is reduced. A large volume of compressed air can be fed with least pressure loss without air leak. Moreover the joints have a compact design. Thus the joints will satisfy strict user's demands.
Pneumatic P.U Pipes are mandatory in all Pneumatic applications and we keep a vast range from 4 mm up to 16 mm. There are also several variations of Pipes such as Coiled Hose, Hose Reels which is all available under our roof.