Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.
Related products
Hydraulic Direction Control Valve
( Customer review)
Directional control valves (DCVs) are one of the most fundamental parts of hydraulic and pneumatic systems. DCVs allow fluid flow (hydraulic oil, water or air) into different paths from one or more sources. DCVs will usually consist of a spool inside a cylinder which is mechanically or electrically actuated. A directional control valve is extended and retracts control for your hydraulic cylinders. It provides a flow path from the pump to the cylinders and a return path from the cylinders to the fluid reservoir.Type of direction control valve we are dealing in:
- Solenoid Operated Directional Valve
- Solenoid Controlled Pilot Operated Directional Valve
- Pilot Operated Directional Valve
- Poppet Type Directional Valve
Brass check valve
( Customer review)
The main purpose of a check valve in a system is to prevent backflow, which could damage equipment or contaminate media upstream. Check valves are generally installed in pipelines to prevent backflow. A check valve is basically a
one-way valve, in which the flow can run freely one way, but if the flow turns the valve will close to
protect the piping, other valves, pumps etc.There are basically two type of check valve:
- Vertical check valve (Non return valve)
- Horizontal check valve (T type)