In the absence of electrical supply, manually operated valves such as Hand Lever Valves are used. The functioning is the same; however, the solenoid coil is replaced by a hand lever, which controls the movement of the spool inside the valve, thereby allowing the air to pass.
Anti Spark PU Tube
(0 Customer reviews)Combining outstanding spark resistance with superb flexibility, this range is perfectly suited for welding applications. Two types of PU – ether with PVC sheath or single layer ether. Is available and rapid installation with any type of Pneumatic Fitting.
Description
Application:
- Suitable for application with mechanical constrains
- Cooling
- Welding robots resistant to spark and welding slag
- Anti abrasive properties
Related products
Pneumatic Auto Drain Valve
( Customer review)
A drain valve performs the critical function of allowing excess water vapour to escape into the atmosphere. The removal of condensation helps prevent the formation of corrosion that will eventually damage the compressor and shorten its lifespan.Some compressed air auto drains work on the float principal. As water and contamination accumulates in the bottom of the bowl, it will ultimately lift a float. The compressed air, under pressure in the bowl, will then vent to atmosphere through the drain opening, blowing the water and debris from the bowl as it does.
Quick Exhaust Valve
( Customer review)
Quick Exhaust Valves facilitate accelerated movement of the cylinder rod or valve actuator. A Quick Exhaust Valve is a 3/2 valve with an extra large exhaust orifice designed to fit directly onto the cylinder port connection.The function of a quick-release valve is to rapidly exhaust air from the controlled device. It is normally located adjacent to the controlled device, rather than requiring exhaust air to return and exhaust through the control valve. This decreases release time.
Diaphragm Operated Solenoid Valve
( Customer review)
Diaphragm valves are bi-directional, on-off throttle valves. They are used to control fluid flow by regulating the area with which media can enter and exit the valve, effectively changing its speed and velocity.The most common diaphragm valves use pneumatic actuators; in this type of valve, air pressure is applied through a pilot valve into the actuator which in turn raises the diaphragm and opens the valve. This type of valve is one of the more common valves used in operations where valve speed is a necessity.AVAILABLE IN BRASS, STAINLESS STEEL, HIGH PRESURE APPLICATION
