Air- Vent valves are used in independent, central, radiant panel heating systems & HVAC systems, etc.OPERATION: - When there is air in the Air-Vent Valve, the force of the float weight acts on the lever which is integral with the plug, thus causing it to move down. Air valves are hydro mechanical devices designed to automatically release air and wastewater gases or admit air during the filling, draining or operation of liquid piping systems for water and wastewater services.
A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball's hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve's status. We have wide range of Quality ball valves from 8 MM in size to 80 MM
The main purpose of a check valve in a system is to prevent backflow, which could damage equipment or contaminate media upstream. Check valves are generally installed in pipelines to prevent backflow. A check valve is basically a one-way valve, in which the flow can run freely one way, but if the flow turns the valve will close to protect the piping, other valves, pumps etc.There are basically two type of check valve:
- Vertical check valve (Non return valve)
- Horizontal check valve (T type)
Gas cocks are shut-off ball type valves commonly used in installation of residential and commercial appliances and heating equipment such as gas stoves, fireplaces, water heaters, boilers, furnaces, etc. They are compatible with natural, manufactured, liquefied petroleum gas (LPG or propane) or air mixtures of such.
Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.
A butterfly valve is a valve that isolates or regulates the flow of a fluid. The closing mechanism is a disk that rotates.Features: - Size : - 25 NB TO 500 NB Material : - CI, CS, IC, CF8, CF8M, GUN METAL (OTHER MATERIAL GRADE ON REQUEST) End Connection: - Wafer, Lug & Flange Type Suitable To Mount Between 150# Flanges Operation Type: - Hand Lever, Gear Box It Assist Proportion Opening and Locking At Desired Opening Pressure Rating : - 150# AND 300# AND OTHER CLASS AVAILABLE ON REQUEST
A gate valve, also known as a sluice valve, is a valve which opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired.Features: - Size: - 25 NB TO 500 NB Material: - CI, CS, IC, CF8, CF8M, GUN METAL (OTHER MATERIAL GRADE ON REQUEST) End Connection: - Flanged end ANSI B 16.5, 150#, 300# and Screwed Operation Type: - Hand wheel, gearbox or electric actuator Pressure Rating: - 150# AND 300# AND OTHER CLASS AVAILABLE ON REQUEST
We provide our clients with a qualitative range of Gauge Cock Valves are widely used in various industries to visually monitor the liquid level in tanks. The compact design of Gauge Valves enables it to be safely located close to the tank. Available in various standard models, these valves are appreciated by our clients for its corrosion resistance and sturdiness.Material: stainless steel, Brass
A globe valve, different from ball valve, is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body.Features: - Size: - 25 NB TO 500 NB Material: - CI, CS, IC, CF8, CF8M, GUN METAL (OTHER MATERIAL GRADE ON REQUEST) End Connection : - Flanged end ANSI B 16.5, 150#, 300# and Screwed Operation Type: - Hand wheel, gearbox or electric actuator Pressure Rating : - 150# AND 300# AND OTHER CLASS AVAILABLE ON REQUEST
Directional control valves (DCVs) are one of the most fundamental parts of hydraulic and pneumatic systems. DCVs allow fluid flow (hydraulic oil, water or air) into different paths from one or more sources. DCVs will usually consist of a spool inside a cylinder which is mechanically or electrically actuated. A directional control valve is extended and retracts control for your hydraulic cylinders. It provides a flow path from the pump to the cylinders and a return path from the cylinders to the fluid reservoir.Type of direction control valve we are dealing in:
- Solenoid Operated Directional Valve
- Solenoid Controlled Pilot Operated Directional Valve
- Pilot Operated Directional Valve
- Poppet Type Directional Valve