Pneumatic cylinder(s) (sometimes known as air cylinders) are switch use the power of compressed gas to produce a force in a reciprocating linear motion.Like hydraulic cylinders, something forces a piston to move in the desired direction. The piston is a disc or cylinder, and the piston rod transfers the force it develops to the object to be moved. Engineers sometimes prefer to use pneumatics because they are quieter, cleaner, and do not require large amounts of space for fluid storage.Because the operating fluid is a gas, leakage from a pneumatic cylinder will not drip out and contaminate the surroundings, making pneumatics more desirable where cleanliness is a requirement. For example, in the mechanical puppets of the Disney Tiki Room, pneumatics is used to prevent fluid from dripping onto people below the puppets.
Air filters( Customer review)
Compressed air is hot, wet, and dirty. Air filters clean contaminants from compressed air to insure proper, consistent operation and to reduce wear on mechanical parts.
Diaphragm operated valves( Customer review)
Diaphragm valves (or membrane valves) consists of a valve body with two or more ports, a diaphragm, and a "weir or saddle" or seat upon which the diaphragm closes the valve. The valve is constructed from either plastic or metal.
Regulators( Customer review)
Each pneumatic system has an optimal operating pressure and exceeding this pressure results in excessive wear and wastes compressed air. Regulators are designed to maintain a consistent prescribed outlet pressure regardless of the inlet pressure and also maintain a consistent pressure regardless of flow rate requirements. The precision needed to maintain the regulation and flow requirements determines the type and cost of regulators needed.
Hydraulic high pressure hoses( Customer review)
High pressure hoses are design for hydrostatic transmission and impulse applications. Each hose is designed to meet or excess SAE specification and performance requirement. These hydraulic hoses are compatible with Hydraulic fluid, Vegetables, Oil, Gases, Mining and Manufacturing. Also used in transferring high temp fluids.These are providing optimum performance and flexibility for easier routing and plumbing.
Lubrication Systems( Customer review)
Introducing a lubricant, generally oil, into compressed air helps reduce friction and wear, thereby improving efficiency and increasing the life of components. Since lubricated compressed air generally washes out existing lubricants, it should always be used once introduced.
Hand Lever Valve( Customer review)
Hand Lever Valves are used to operate Pneumatic Cylinders. In the absence of electrical supply, manually operated valves such as Hand Lever Valves are used. The functioning is the same, however, the solenoid coil is replaced by a hand lever, which controls the movement of the spool inside the valve, thereby allowing the air to pass.
F.R.L Combination( Customer review)
Aadarsh Hydropneumatics is a notable exporter and supplier of engineering products. Authorized and Specialist in F.R.L CombinationFilter, regulator, and lubricator (FRL) compressed air systems play a vital role in providing clean air at a specific pressure. Lubricator (if necessary) is required to confirm correct operation of pneumatic components and enhance their lifetime performance.
Foot padal valve( Customer review)
Foot Pedal Valves are used to operate Pneumatic Cylinders. In the absence of electrical supply, manually operated valves such as Foot Pedal Valves are used. The functioning is the same, however, the solenoid coil is replaced by a foot pedal, which controls the movement of the spool inside the valve, thereby allowing the air to pass.
Solenoid Pilot operated valves( Customer review)
In pilot operated valves, the plunger opens up the pilot opening while built-up pressure causes the valve to open and close. Although piloted valves require less electrical energy to operate, they usually need to maintain full power in order to remain in an open state, and they perform at a slower rate than direct acting solenoids. Direct acting solenoid valves only need full power when opening the valve, as they can hold their open position even when operating on low power.
Roller valve( Customer review)
Roller Lever Valves are used to actuate the movement of Pneumatic Cylinders. In the absence of electrical supply, manually operated valves such as Roller Lever Valves are used. The functioning is the same, however, the solenoid coil is replaced by a Rolling lever, which actuates the movement of air inside the valve, and out to the Cylinder.
Solenoid Direct acting valves( Customer review)
In a direct acting solenoid valve, a coil magnetically opens the valve in a direct action, lifting the shaft and the seat of the valve without depending on outside pressure.