Foot Pedal Valves are used to operate Pneumatic Cylinders. In the absence of electrical supply, manually operated valves such as Foot Pedal Valves are used. The functioning is the same, however, the solenoid coil is replaced by a foot pedal, which controls the movement of the spool inside the valve, thereby allowing the air to pass.
Solenoid Pilot operated valves
( Customer review)
In pilot operated valves, the plunger opens up the pilot opening while built-up pressure causes the valve to open and close.
Although piloted valves require less electrical energy to operate, they usually need to maintain full power in order to remain in an open state, and they perform at a slower rate than direct acting solenoids. Direct acting solenoid valves only need full power when opening the valve, as they can hold their open position even when operating on low power.
Roller valve
( Customer review)
Roller Lever Valves are used to actuate the movement of Pneumatic Cylinders. In the absence of electrical supply, manually operated valves such as Roller Lever Valves are used. The functioning is the same, however, the solenoid coil is replaced by a Rolling lever, which actuates the movement of air inside the valve, and out to the Cylinder.
Solenoid Direct acting valves
( Customer review)
In a direct acting solenoid valve, a coil magnetically opens the valve in a direct action, lifting the shaft and the seat of the valve without depending on outside pressure.
Push pull valve
( Customer review)
Push Pull Valves are used to operate Pneumatic Cylinders. In the absence of electrical supply, manually operated valves such as Push Pull Valves are used. The functioning is the same; however, the solenoid coil is replaced by a knob, which controls the movement of the spool inside the valve, thereby allowing the air to pass.
Solenoid Two way valves
( Customer review)
Each of the two ports on a two-way valve is alternately used to permit flow as well as close it off. A two-way valve can be specified to be either “normally open" or “normally closed” in its operation. With a normally open valve, the valve remains open until some type of current is applied to close the valve. Suspension of the electrical power causes the valve to automatically reopen to its normal state. A normally closed solenoid valve is the most common, working in the opposite fashion, remaining closed until a power source causes it to open
Pneumatic fittings
( Customer review)
The Push - In One Touch Fittings series pneumatic piping joints excelling in quick fitting, accurate jointing and compact design are suited to the pneumatic systems necessary for automation and labor saving. The tube can be fitted and detached easily, so that workability is remarkably improved. Pressure loss is reduced. A large volume of compressed air can be fed with least pressure loss without air leak. Moreover the joints have a compact design. Thus the joints will satisfy strict user's demands.
Solenoid Three way valve
( Customer review)
Three way valves come with three ports. These are commonly used when alternate and exhaustive pressure is required for operation, as with a coffee machine or dishwasher.
Polyurethane tubes and coil
( Customer review)
Pneumatic P.U Pipes are mandatory in all Pneumatic applications and we keep a vast range from 4 mm up to 16 mm. There are also several variations of Pipes such as Coiled Hose, Hose Reels which is all available under our roof.
Air blow gun
( Customer review)
Air blow guns are a staple of many workplaces, including mechanic shops, assembly lines, and even construction sites. Because they perform essential tasks, ranging from inflating tires to cleaning surfaces, it’s important to choose a high-quality, durable air blow gun that you can rely on every day.
Aluminum P.U fittings and Oil window
( Customer review)Aadarsh Hydropneumatics is a notable exporter and supplier of engineering products. Authorized and Specialist in Aluminium P.U fittings and Oil window
Aluminium P.U fittings and Oil window are used in surroundings where there is involvement of high temperatures or corrosive fluids. Aluminium P.U fittings and Oil window are also procurable in materials with / without support to be used in standard applications. When the fitting is under pressure, these fittings include a positive tube seal which permits the utilization of polyurethane tubing.Aluminium oil glass windows are long-lasting and corrosion resistant which are frequently used in those applications where consistent and faultless signals of the oil level are essential.
Pneumatic air cylinders
( Customer review)
Pneumatic cylinder(s) (sometimes known as air cylinders) are switch use the power of compressed gas to produce a force in a reciprocating linear motion.Like hydraulic cylinders, something forces a piston to move in the desired direction. The piston is a disc or cylinder, and the piston rod transfers the force it develops to the object to be moved. Engineers sometimes prefer to use pneumatics because they are quieter, cleaner, and do not require large amounts of space for fluid storage.Because the operating fluid is a gas, leakage from a pneumatic cylinder will not drip out and contaminate the surroundings, making pneumatics more desirable where cleanliness is a requirement. For example, in the mechanical puppets of the Disney Tiki Room, pneumatics is used to prevent fluid from dripping onto people below the puppets.