A gate valve, also known as a sluice valve, is a valve which opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired.Features: - Size: - 25 NB TO 500 NB Material: - CI, CS, IC, CF8, CF8M, GUN METAL (OTHER MATERIAL GRADE ON REQUEST) End Connection: - Flanged end ANSI B 16.5, 150#, 300# and Screwed Operation Type: - Hand wheel, gearbox or electric actuator Pressure Rating: - 150# AND 300# AND OTHER CLASS AVAILABLE ON REQUEST
A needle valve is a type of valve having a small port and a threaded, needle-shaped plunger. It allows precise regulation of flow, although it is generally only capable of relatively low flow rates.
Category: Valves and pump section
Check valve is one flow direction valve, which ensures flow in one direction and prevents backflow. It is also known as a non-return valve and it can be used in a vertical or horizontal pipeline. The material used in the high-pressure check valve is commonly Carbon steel or stainless steel and it depends on the workability and needs in an industrial setting.It is also available in different sizes such as DN8 to DN50, usually referred to as 1/4” to 2”. The standard working pressure of the high-pressure check valve is 420 bars for size 1/4” to 1”, while pressure reduces to 315 bars from size 1 1/4” to 2” when valve sizes get bigger.
There are typically three types of hydraulic pump constructions found in mobile hydraulic applications. These include gear, piston, and vane; however, there are also clutch pumps, dump pumps, and pumps for refuse vehicles such as dry valve pumps and Muncie Power Products. The hydraulic pump is the component of the hydraulic system that takes mechanical energy and converts it into fluid energy in the form of oil flow. This mechanical energy is taken from what is called the prime mover (a turning force) such as the power take-off or directly from the truck engine. With each hydraulic pump, the pump will be of either a uni-rotational or bi-rotational design. As its name implies, a uni-rotational pump is designed to operate in one direction of shaft rotation. On the other hand, a bi-rotational pump has the ability to operate in either direction.Types of Pumps : Gear Pump Piston Pump Vane Pump
Air- Vent valves are used in independent, central, radiant panel heating systems & HVAC systems, etc.OPERATION: - When there is air in the Air-Vent Valve, the force of the float weight acts on the lever which is integral with the plug, thus causing it to move down. Air valves are hydro mechanical devices designed to automatically release air and wastewater gases or admit air during the filling, draining or operation of liquid piping systems for water and wastewater services.