Check valve is one flow direction valve, which ensures flow in one direction and prevents backflow. It is also known as a non-return valve and it can be used in a vertical or horizontal pipeline. The material used in the high-pressure check valve is commonly Carbon steel or stainless steel and it depends on the workability and needs in an industrial setting.It is also available in different sizes such as DN8 to DN50, usually referred to as 1/4” to 2”. The standard working pressure of the high-pressure check valve is 420 bars for size 1/4” to 1”, while pressure reduces to 315 bars from size 1 1/4” to 2” when valve sizes get bigger.
Hydraulic Gear Pump / Vane Pump
(0 Customer reviews)There are typically three types of hydraulic pump constructions found in mobile hydraulic
applications. These include gear, piston, and vane; however, there are also clutch pumps, dump
pumps, and pumps for refuse vehicles such as dry valve pumps and Muncie Power Products.
The hydraulic pump is the component of the hydraulic system that takes mechanical energy and
converts it into fluid energy in the form of oil flow. This mechanical energy is taken from what is
called the prime mover (a turning force) such as the power take-off or directly from the truck
engine.
With each hydraulic pump, the pump will be of either a uni-rotational or bi-rotational design. As its
name implies, a uni-rotational pump is designed to operate in one direction of shaft rotation. On
the other hand, a bi-rotational pump has the ability to operate in either direction.
Types of Pumps :
Gear Pump
Piston Pump
Vane Pump
Related products
Brass Y type stainer
( Customer review)
Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.
Ball valve (MS SS BRASS)
( Customer review)
A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball's hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve's status. We have wide range of Quality ball valves from 8 MM in size to 80 MM
