Hydraulic section
Hydraulic Hose
( Customer review)
High pressure hoses are design for hydrostatic transmission and impulse applications. Each hose is designed to meet or excess SAE specification and performance requirement. These hydraulic hoses are compatible with Hydraulic fluid, Vegetables, Oil, Gases, Mining and Manufacturing. Also used in transferring high temp fluids.These are providing optimum performance and flexibility for easier routing and plumbing.
S.S Flexible bellow hoses
( Customer review)
Metal hose is a flexible metal line element. There are two basic types of metal hose that differ in their design and application: strip wound hoses and corrugated hoses. Strip wound hoses have a high mechanical strength (e.g. tensile strength and tear strength). Corrugated hoses can withstand high pressure and provide maximum leak tightness on account of their material. Corrugated hoses also exhibit corrosion resistance and pressure tightness under the most extreme conditions, such as in aggressive seawater or at extreme temperatures such as found in space or when transporting cooled liquid gas. They are particularly well suited for conveying hot and cold substances.Fulfilling the demands of customers as a manufacturer, supplier and retailer, we are engaged in offering SS Hoses. Demanded in automobile and automotive industries, these hoses are manufactured with perfection at our state-of-the-art infrastructure facility. In addition, our clients can avail these hoses from us in different grades and designs as per their requirement.Features:
- Longer functional life
- Rust-proof nature
- Good finish
Low pressure hose
( Customer review)
Catering to the demands of customers as a manufacturer, supplier and retailer, we are engrossed in offering Low Pressure Flexible Hoses. Specifically designed by our professionals using superior-grade raw materials, these hoses are widely demanded across the nationwide market. Also, these hoses have flat structure inside and a screw shaped outside.Features:
- High strength
- Free from leakage
Teflon corrugated hose
( Customer review)
Braided Teflon (PTFE) hose is an extruded Teflon core with an outer stainless steel braid for strength. Teflon (PTFE) hose is flexible and strong, when combined with stainless steel, can perform under high pressure and continuous flexing and vibration conditions. With a wide range of chemicals compatibility Teflon hose can handle an almost endless variety of fluids at extremes of pressure and temperature. Almost no substance can stick to Teflon. This property ensures the purity of any product transferred via a Teflon hose. It also allows for alternate use with different products. Typical applications include high pressure &high temperature for brake, clutch and power steering lines off-road brake, transmission, clutch, gauge, nitrous oxide, hydraulic and air conditioning.Features
- High temperature resistant, operating temperature: -50℃～210℃
- Corrosion resistant to strong acid, strong base, chemical reagent, oil etc
- Transient temperature resistant range: -70℃~+260℃
Camp lock coupling
( Customer review)
A cam and groove coupling, also called a camlock fitting, is a form of hose coupling. This kind of coupling is popular because it is a simple and reliable means of connecting and disconnecting. quickly and without tools.A Cam and groove fitting can be used in a system where rapid filling of chemical drums takes place. It can be used by factories that have needs of dye, paint and ink medium transfers. It is used where frequent changes of hoses are required to find the right mix. It also suitable for petroleum trucks, etc.
Oil Filter
( Customer review)
An oil filter is a filter designed to remove contaminants from engine oil, transmission oil, lubricating oil, or hydraulic oil. Oil filters are used in many different types of hydraulic machinery. A chief use of the oil filter is in internal-combustion engines in on- and off-road motor vehicles, light aircraft, and various naval vessels. Other vehicle hydraulic systems, such as those in automatic transmissions and power steering, are often equipped with an oil filter. Gas turbine engines, such as those on jet aircraft, also require the use of oil filters. Aside from these uses, oil production, transport, and recycling facilities also employ filters in the manufacturing process.
P.P clamp / PVC clamp
( Customer review)
Stauff pipe clamps are made accordance with DIN 3015 standards. Stauff pipe clamps are used for quick and easy pipes and hoses installations. They are used to reduce the impact and vibration of fluid flow and provide strength in the direction of the tube axis.
Pipe clamps are commonly known as pipe brackets, pvc clamps, pipe clamps, tube clamps, or just stauff clamps. Stauff pipe clamps are typically available in three series: Standard. Heavy, and Twin. Common materials used for pipe clamps are polypropylene (PP), polyamide (PA), Aluminium (AL). Different configurations of pipe clamp are available to suit different requirements.
PVC Braided hose
( Customer review)
Braided hose pipe offers far higher pressure capability than-reinforced PVC tubing. It is made from non-toxic Ingredients conforming to USP Class VI and FDA Standard. Mirror Smooth interior permits outstanding flow characteristics conforming and abrasion resistance with flexibility. It is light in weight so easy to handle. It does not crack when in use or stored for long time. PVC makes the surface smoother and allows better flow of fluid. Its clear transparency allows air lock and blockage if any, to be quickly detected
Quick release coupling
( Customer review)
A quick connect fitting, also called a quick disconnect or quick release coupling, is a coupling used to provide a fast, make-or-break connection of fluid transfer lines. Operated by hand, quick connect fittings replace threaded or flanged connections, which require wrenches. When equipped with self-sealing valves, quick connect fittings will, upon disconnection, automatically contain any fluid in the line.
S.S. Swage lock fittings / M.S Compression fitting
( Customer review)
Compression fittings are used in plumbing and electrical conduit systems to join two tubes or thin-walled pipes together. Compression fittings for attaching tubing (piping) commonly have ferrules.Compression fittings are popular because they do not require soldering, so they are comparatively quick and easy to use. They require no special tools or skills to operate. They work at higher pressures and with toxic gases. Compression fittings are especially useful in installations that may require occasional disassembly or partial removal for maintenance etc...
Valves and cock section
A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve’s status.
Globe valve
( Customer review)
A globe valve, different from ball valve, is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body.
Gate valve
( Customer review)
A gate valve, also known as a sluice valve, is a valve which opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired.
Butterfly valves
( Customer review)
A butterfly valve is a valve that isolates or regulates the flow of a fluid. The closing mechanism is a disk that rotates.
Needle valves
( Customer review)
A needle valve is a type of valve having a small port and a threaded, needle-shaped plunger. It allows precise regulation of flow, although it is generally only capable of relatively low flow rates.
Foot valves
( Customer review)
Foot Valves are a form of check valve, installed at the bottom of Pump suction line, inside the wet well. Foot valves are an inexpensive way to prime a single centrifugal pump. Since Foot Valves are continually submerged in the wet well and not readily accessible for inspection or repair, it is important to select a Foot Valve of high quality long wearing construction. Typical materials include PVC or plastic and bronze for foot valves.
Safety valves
( Customer review)
A safety valve is a valve that acts as a fail-safe in a thermal-hydraulics plant. An example of safety valve is a pressure relief valve (PRV), which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits. Pilot-operated relief valves are a specialized type of pressure safety valve. A leak tight, lower cost, single emergency use option would be a rupture disk.
Pneumatics section
Pneumatics is a branch of engineering that makes use of gas or pressurized air.
Pneumatic systems used in industry are commonly powered by compressed air or compressed inert gases. A centrally located and electrically powered, compressor power cylinder, Air motors and other pneumatic devices, A Pneumatic system controlled through manual or automatic solenoid valve is selected when it provides slower cost, more flexible, or safer alternative to electric in dentistry, construction, mining, and other areas
Solenoid Direct acting valves
( Customer review)
In a direct acting solenoid valve, a coil magnetically opens the valve in a direct action, lifting the shaft and the seat of the valve without depending on outside pressure.
Solenoid Pilot operated valves
( Customer review)
In pilot operated valves, the plunger opens up the pilot opening while built-up pressure causes the valve to open and close.
Although piloted valves require less electrical energy to operate, they usually need to maintain full power in order to remain in an open state, and they perform at a slower rate than direct acting solenoids. Direct acting solenoid valves only need full power when opening the valve, as they can hold their open position even when operating on low power.
Solenoid Two way valves
( Customer review)
Each of the two ports on a two-way valve is alternately used to permit flow as well as close it off. A two-way valve can be specified to be either “normally open" or “normally closed” in its operation. With a normally open valve, the valve remains open until some type of current is applied to close the valve. Suspension of the electrical power causes the valve to automatically reopen to its normal state. A normally closed solenoid valve is the most common, working in the opposite fashion, remaining closed until a power source causes it to open
Solenoid Three way valve
( Customer review)
Three-way valves come with three ports. These are commonly used when alternate and exhaustive pressure is required for operation, as with a coffee machine or dishwasher.
Diaphragm operated valves
( Customer review)
Diaphragm valves (or membrane valves) consists of a valve body with two or more ports, a diaphragm, and a "weir or saddle" or seat upon which the diaphragm closes the valve. The valve is constructed from either plastic or metal.
Hand Lever Valve
( Customer review)
Hand Lever Valves are used to operate Pneumatic Cylinders. In the absence of electrical supply, manually operated valves such as Hand Lever Valves are used. The functioning is the same, however, the solenoid coil is replaced by a hand lever, which controls the movement of the spool inside the valve, thereby allowing the air to pass.
Foot padal valve
( Customer review)
Foot Pedal Valves are used to operate Pneumatic Cylinders. In the absence of electrical supply, manually operated valves such as Foot Pedal Valves are used. The functioning is the same, however, the solenoid coil is replaced by a foot pedal, which controls the movement of the spool inside the valve, thereby allowing the air to pass.
Roller valve
( Customer review)
Roller Lever Valves are used to actuate the movement of Pneumatic Cylinders. In the absence of electrical supply, manually operated valves such as Roller Lever Valves are used. The functioning is the same, however, the solenoid coil is replaced by a Rolling lever, which actuates the movement of air inside the valve, and out to the Cylinder.
Push pull valve
( Customer review)
Push Pull Valves are used to operate Pneumatic Cylinders. In the absence of electrical supply, manually operated valves such as Push Pull Valves are used. The functioning is the same; however, the solenoid coil is replaced by a knob, which controls the movement of the spool inside the valve, thereby allowing the air to pass.
Pneumatic air cylinders
( Customer review)
Pneumatic cylinder(s) (sometimes known as air cylinders) are switch use the power of compressed gas to produce a force in a reciprocating linear motion.Like hydraulic cylinders, something forces a piston to move in the desired direction. The piston is a disc or cylinder, and the piston rod transfers the force it develops to the object to be moved. Engineers sometimes prefer to use pneumatics because they are quieter, cleaner, and do not require large amounts of space for fluid storage.Because the operating fluid is a gas, leakage from a pneumatic cylinder will not drip out and contaminate the surroundings, making pneumatics more desirable where cleanliness is a requirement. For example, in the mechanical puppets of the Disney Tiki Room, pneumatics is used to prevent fluid from dripping onto people below the puppets.
Pneumatic fittings
( Customer review)
The Push - In One Touch Fittings series pneumatic piping joints excelling in quick fitting, accurate jointing and compact design are suited to the pneumatic systems necessary for automation and labor saving. The tube can be fitted and detached easily, so that workability is remarkably improved. Pressure loss is reduced. A large volume of compressed air can be fed with least pressure loss without air leak. Moreover the joints have a compact design. Thus the joints will satisfy strict user's demands.
Air filters
( Customer review)
Compressed air is hot, wet, and dirty. Air filters clean contaminants from compressed air to insure proper, consistent operation and to reduce wear on mechanical parts.
Regulators
( Customer review)
Each pneumatic system has an optimal operating pressure and exceeding this pressure results in excessive wear and wastes compressed air. Regulators are designed to maintain a consistent prescribed outlet pressure regardless of the inlet pressure and also maintain a consistent pressure regardless of flow rate requirements. The precision needed to maintain the regulation and flow requirements determines the type and cost of regulators needed.
Lubrication Systems
( Customer review)
Introducing a lubricant, generally oil, into compressed air helps reduce friction and wear, thereby improving efficiency and increasing the life of components. Since lubricated compressed air generally washes out existing lubricants, it should always be used once introduced.
Polyurethane tubes and coil
( Customer review)
Pneumatic P.U Pipes are mandatory in all Pneumatic applications and we keep a vast range from 4 mm up to 16 mm. There are also several variations of Pipes such as Coiled Hose, Hose Reels which is all available under our roof.
Air blow gun
( Customer review)
Air blow guns are a staple of many workplaces, including mechanic shops, assembly lines, and even construction sites. Because they perform essential tasks, ranging from inflating tires to cleaning surfaces, it’s important to choose a high-quality, durable air blow gun that you can rely on every day.
